WMJ1000 trough grinding machine 

 First, the machine name 
 WMJ1000 slot Vibration grinding machine 

 Second, use 
 For stainless steel, iron, copper, zinc, aluminum, magnesium Xin wait until the material by punching, die casting, casting, powder metallurgy parts and ceramics, jade, synthetic resins, plastics, porcelain and other items of material deburring and surface polishing. Particularly suitable for large workpieces, such as the long axis or plate-type workpiece deburring and surface polishing. 

 Main technical parameters 
 Dimensions (L × W × H) 1500 × 1300 × 1600mm 
 Weight 800kg 
 Nominal cylinder capacity of 1000L 
 Motor Power 5.5kw or 3.7kw 
 Fourth, the main structure and working principle 
 The machine consists of container, chassis, springs, and vibration motor composition. Vibrating motor bolted connection with the container, and sitting in the spring associated with the base, its structure can be found in Figure 1 diagrams the horizontal vibration of grinding machine. 
 In the grinding process, the container is mainly affected by vibration, and shall have good steel, so steel plates welded together. In order to avoid the process of the workpiece surface is scratched vibration and reduce noise in the container wall lining of rubber or polyurethane, rubber material has a wear-resistant, acid and alkali resistance, but not oil. Polyurethane has a higher wear resistance. 
 Vibration motor, the lower part of the two heavy load imbalance by adjusting their relative positions, horizontal and vertical amplitude can be adjusted in size to meet different types of parts finishing needs. 
 Working Principle is a principle of vibration grinding, deburring and polishing will be required of the workpiece, into a pre-preparation of a good abrasive grinding stone and container, the container to rely on the regularity of vibration, so that the workpiece and the grinding stone produces relative motion grinding with each other, the protruding spikes on the worn surface and the surrounding, and to rounding sharp edges and surface polishing. 
 Fifth, installation and adjustment 
 1, the only flat on the machine on a flat concrete floor (thickness of the concrete should be greater than 10cm). 2,2, the machine vibration motor is installed, the factory has been adjusted. 
 3, the electrical control cabinet placed in a vibration mill next to its line of access into the external power supply, the outgoing external vibration motor, about 1.5m apart. 

 Sixth, the use of the machine 
 Processing components according to the shape, size, material, grinding and processing volume to determine the purpose of grinding conditions.